output specifications rr7-s05/d05 5 watt 4:1 regulated single & dual output absolute maximum ratings (4) 1) typical value at nominal input voltage and full load. 2) tested by nominal vin and constant resistor load. 3) measured input reflected ripple current with a simulated source inductance of 12uh. 4) exceeding the absolute ratings of the unit could cause damage. it is not allowed for continuous operating. 5) its recommended to add c1 (68 f), c2 (33 f), l (12 h) in input end to achieve en55022 conducted class a. the models listed are just for standard type. if you need a special specification product, please contact our service. phone: +49 69 984047-0, mail to: info@rsg-electronic.de or use the forms on www.rsg-electronic.de (?kontakt). dip24, w ide 4:1 input range full smd technology 1500 vdc isolation up to 3500 vdc isolation continuous short circuit protection efficiency up to 82% -40c~85c operation temperature range optional plastic case emi complies with en55022 class a voltage accuracy 1% line regulation 0.5% load regulation 0.5% (output 3.3v / 3.3v model) 1.5% ripple & noise (20 mhz bandwith) (1) 60 mv pk-pk short circuit protection indefinite (automatic recovery) temperature coefficient 0.02%/c capacitor load (2) see table voltage range see table max. input current see table no-load input current see table input filter pi type input reflected ripple current (3) 35 ma pk-pk input specifications efficiency (typ.) see table i/o isolation voltage (3 sec.) input/output 1500 ~ 3500 vdc metal case / input & output 1000 vdc i/o isolation capacitance 500 pf typ. i/o isolation resistance 1000 m ohm switching frequency typ. 266 khz humidity 95% rel. h reliability calculated mtbf (mil-hdbk-217f) > 1.121 mhrs. safety standard (designed to meet) iec 60950-1: 2001 general specifications case material nickel-coated copper non-conductive black plastic (ul94v-0 rated) base material non-conductive black plastic (ul94v-0 rated) pin material ? 0.5 mm brass solder-coated potting material epoxy (ul94v-0 rated) weight metal 17.0 g, plastic 13.5 g dimensions 1.25 x 0.8 x 0.4 physical specifications operating temperature (see derating curve) -40c~ 85c maximum case temperature 100c storage temperature -40c~125c cooling nature convection environment specifications note these are stress ratings. exposure of devices to any of these conditions may adversely affect long-term reliability. input voltage (100 ms) 24 modes -0.7 ~ 40 vdc 48 modes -0.7 ~ 80 vdc lead soldering temperature 260c (1.5 mm from case 10 sec.) all specifications typical at ta = 25c, nominal input voltage and full load unless otherwise specified. the information and specifications contained in this data sheet are believed to be correct at time of publication. however, we accept no responsibility for consequences arising from printing errors or inaccuracies. subject to change without notice. page: 1/3 last update: 18.02.10 rr-series, dil 24 package, pic. similar emc specifications radiated emissions en55022 class a conducted emissions (4) en55022 class a esd iec61000-4-2 perf. crit. b rs iec61000-4-3 perf. crit. a eft iec61000-4-4 perf. crit. b cs iec61000-4-6 perf. crit. a pfmf iec61000-4-8 perf. crit. a
rr7-s05/d05 5 watt 4:1 regulated single & dual output derating curve page: 2/3 last update: 18.02.10 number structure isolation 1=1.5 kvdc 3=3.5 kvdc power 05=5w output 03=3.3v 05=5v 07=7.2v 09=9v 12=12v 15=15v 18=18v 24=24v code internal rr7 - xx xx s 05 a 1 (p)* type s=single d=dual input 24=9~36v 48=18~72v * standard version in metal case. add suffix ? p for plastic case! name/package rr7=dil24 model number input input current (ma) output output current efficiency capacitor range vdc no load / full load vdc full load (ma) @fl (%) load ( hf) rr7-2403s05ax 9-36 18 / 238.3 3.3 1300 75 1000 rr7-2405s05ax 9-36 18 / 260.4 5 1000 80 680 rr7-2407s05ax 9-36 18 / 260.4 7.2 694 80 470 rr7-2409s05ax 9-36 18 / 257.2 9 555 81 220 rr7-2412s05ax 9-36 18 / 257.2 12 416 81 100 rr7-2415s05ax 9-36 18 / 254.1 15 333 82 100 rr7-2418s05ax 9-36 18 / 260.4 18 277 80 68 rr7-2424s05ax 9-36 18 / 260.4 24 208 80 47 RR7-2403D05AX 9-36 18 / 281.5 3.3 757 74 470 rr7-2405d05ax 9-36 18 / 260.4 5 500 80 330 rr7-2407d05ax 9-36 18 / 260.4 7.2 347 80 100 rr7-2409d05ax 9-36 18 / 257.2 9 277 81 68 rr7-2412d05ax 9-36 18 / 257.2 12 208 81 47 rr7-2415d05ax 9-36 18 / 254.1 15 166 82 47 rr7-2418d05ax 9-36 18 / 260.4 18 138 80 22 rr7-2424d05ax 9-36 18 / 260.4 24 104 80 22 rr7-4803s05ax 18-72 15 / 119.2 3.3 1300 75 1000 rr7-4805s05ax 18-72 15 / 130.2 5 1000 80 680 rr7-4807s05ax 18-72 15 / 130.2 7.2 694 80 470 rr7-4809s05ax 18-72 15 / 128.6 9 555 81 220 rr7-4812s05ax 18-72 15 / 128.6 12 416 81 100 rr7-4815s05ax 18-72 15 / 127 15 333 82 100 rr7-4818s05ax 18-72 15 / 130.2 18 277 80 68 rr7-4824s05ax 18-72 15 / 130.2 24 208 80 47 rr7-4803d05ax 18-72 15 / 140.7 3.3 757 74 470 rr7-4805d05ax 18-72 15 / 130.2 5 500 80 330 rr7-4805d05ax 18-72 15 / 130.2 7.2 347 80 100 rr7-4809d05ax 18-72 15 / 128.6 9 277 81 68 rr7-4812d05ax 18-72 15 / 128.6 12 208 81 47 rr7-4815d05ax 18-72 15 / 127 15 166 82 47 rr7-4818d05ax 18-72 15 / 130.2 18 138 80 22 rr7-4824d05ax 18-72 15 / 130.2 24 104 80 22 model selection guide
page: 3/3 last update: 18.02.10 mail: info@rsg-electronic.de www.rsg-electronic.de rsg electronic components gmbh sprendlinger landstr. 115 d-63069 offenbach tel. +49 69 984047-0 fax +49 69 984047-77 rr7-s05/d05 5 watt 4:1 regulated single & dual output pin number 2 3 9 11 14 16 22 23 dual -v input -v input common -v output +v output common +v input +v input single -v input -v input n.p. n.c. +v output -v output +v input +v input pin connections mechanical specifications mechanical specifications dil 24 package metal case dil 24 package plastic case (?p) rsg rr7-xxxxx05ax rsg rr7-xxxxx05ax(p) efficiency vs output current 24 efficiency vs output current 48 24 models 48 models notes: all dimensions are typical in mm (inches). 1) pin diameter: 0.5 0.05 (0.02 0.002) 2) pin pitch tolerance: 0.35 ( 0.014) 3) case tolerance: 0.5 ( 0.02) the pin connections for high isolation models are the same as normal ones!
|
